What is Pyrolamas®?

Our patented system Pyrolamas®, consists on a completely new concept for orienting the single shot tubes for the pyrotechnic industry. This new concept is mainly based in the multiconfiguration idea. It allows to the pyrotechnician, with only few and simple elements, to mount any setup for the single shots, both bidimensional and tridimensional. Pyrolamas® can be entirely adapted to the needing of any single pyrotechnic show.

The system can be unassembled and reassembled as many times as needed. Pyrolamas® allows to substitute many of those bulky and heavy racks by only one same system. It supposes a significant money saving in rigs, due to its versatility, in transport and storage, because its weight and volume reduction. It lets completely eliminate the underutilized racks that remain stored for long time periods, occupying a valuable space.


After all these years, we at Gamon detected a gap in coverage on the setup elements for the Pyro Shows. There is a wide catalogue of products on the market, customized for each one. On a globalised market where products from such different manufacturers are available, we found the need of a system that could work for many of them and to adapt to any setup possible, and that lead us to work and a new design under this basis.

Therefore, we started a wide study on the actual Pyro reality and its problems under the setup structures for single shoots and similar (gerbs, jets, flames, etc.)

The keys for this research were:

MULTI PRODUCT

On the market, there are a few products, some of them based on cylindrical tubes and others with a foot for stability.

PyroLamas system adapts to any type of Pyrotechnic product, whether sliding them into the channel provided or by using the X Holder that holds the tubes form any manufacturer.

MULTI SETUP

Reality teaches us that shows are set up from products from different manufacturers and not only one of them.

The new PyroLamas system is made with high quality reinforced aluminium profiles that assemble toeach other and include a channel where to slide the tubes to use. With these profiles, flat or curved bases can be arranged, also with angles to make 3D effect 360º.

If using other systems means storing such a few racks for any different setup and that leads to a lot of space and investment if a company wants to be able to apply for the huge quantity of venues possible.

PyroLamas system, as a multi setup idea, gets rid of storing different racks by substituting them for a single model profile that will adapt to a any rack configuration.

SAVING ON STORAGE AND TRANSPORT COSTS

AS the profiles are easy dismantle and stackable, the volume and cost for storing reduces to minimum.

Reinforced aluminium provides durability under the most hostile environments, its weatherproof and just need an easy cleaning after use.

PyroLamas can be used as a curved rack, flat, single or assembled, no system is as flexible as ours.

WORLDWIDE

PyroLamas system is available around the world, customers from the Whole Europe, North, Central and South America, Australia, Japan etc, are using already our system. Strategical distributors located in Portugal, The Netherlands, Germany and US supply also these elements including teaching courses and personal advice for the final customer.

Catálogo Pyrolamas 2019-2020

 

Know Pyrolamas®

Do you need more information about the multiple possibilities that our glad system Pyrolamas® brings? Don't hesitate to contact with us for further information. We will be charming to help you.

Pyrolamas® Products

These are the different elements that conforms our system Pyrolamas®. Choose those who better fits your requirements, and be calm, if you later have another requirements, you will can use what you already have, extending its possibilities with only few extra elements.

 
Aluminium profile

Aluminium profile

Ref: 39145 W38 A15

W= 38 mm A= 15º Length 450 mm

Ref: 39155 W38 A30

W= 38 mm A= 30º Length 550 mm

Ref: 39145 W40 A15

W= 40 mm A= 15º Length 350 mm

Ref: 39155 W40 A30

W= 40 mm A= 30º Length 550 mm

Angles for flat set up

Angles for flat set up

Ref: 39100 90V

A=

Ref: 39110 80V

A= 10º

Ref: 39115 75V

A= 15º

Ref: 39120 70V

A= 20º

Ref: 39130 60V

A= 30º

Ref: 39140 50V

A= 40º

Ref: 39145 45V

A= 45º

Ref: 39150 40V

A= 50º

Ref: 39160 30V

A= 60º

Ref: 39170 20V

A= 70º

Ref: 39180 10V

A= 80º

Reinforcements for big calibers

Reinforcements for big calibers

Ref: 39107 R

For 7 elements

Ref: 39109 R

For 9 elements

Supporting ribs

Supporting ribs

Ref: 39103 SO 9753

9-15º/7 - 15º/5 - 15º/3 - 15º

Ref: 39103 SO 53

5-15º/3-15º

Ref: 39103 SO 5 3_30

7-15º/5 - 15º/3-30º

Ref: 39103 SO 3_30

3-30º

Accesories

Accesories

Stopper

Ref: 39101 S

Very useful for retaining the angles in place. Compatible with both profile wides.

Locking Device

Ref: 39100 PE

Installed at the bottom of each profile. It Prevents slippage between them

Adaptor for tubes 40x30x3mm

Ref: 39102

With this new adaptor you can attach also the singleshots with foot of 40x40x3 mm onto both widths of the aluminium profiles

Supplement of 5º for the angles

Ref: 39102 5

It allows you to create new angles by adding it to a normalized angle.
Now you can create steps of 5º like 0º, 0º+5º, 10º, 10º+5º, 20º...

Supports

Supports

X Holder

Ref: 3900 X

Being compatible with both profile wides, is used to attach to them the single-shots by means of a cable tie.

Tube holder for Angles

Ref: 3900 X A

Attached directly to the angles, allow us to make really versatile set ups.

Pyrolamas® Configurations

The possibilities are near infinite. These are only few of the possibilities with Pyrolamas®.